Motor Driver

Sort By:  
  • Cytron 10A Motor Driver Shield (Arduino)
    Features:
    • Bi-directional control for 1 brushed DC motor.
    • Support motor voltage ranges from 7V to 25V (Rev1.0), 7V to 30V (Rev2.0).
    • Maximum current up to 10A continuous and 15A peak (10 seconds).
    • 3.3V and 5V logic level input.
    • Solid state components provide faster response time and eliminate the wear and tear of mechanical relay.
    • Fully NMOS H-Bridge for better efficiency and no heat sink is required.
    • Speed control PWM frequency up to 10KHz.
    • Stackable I/O header pin.
    • Selectable digital pins for PWM and DIR.
    Document and References:
    Coming Soon
    Rp.0
  • Cytron 10Amp DC Motor Driver
    Features:
    • Bi-directional control for 1 brushed DC motor.
    • Support motor voltage ranges from  3V 5V to 25V 30V
    • Maximum current up to 10A 13A continuous and 15A 30A peak (10 seconds).
    • 3.3V and 5V logic level input.
    • Solid state components provide faster response time and eliminate the wear and tear of mechanical relay.
    • Fully NMOS H-Bridge for better efficiency and no heat sink is required.
    • Speed control PWM frequency up to 10KHz 20KHz (Actual output frequency is same as input frequency).
    • Support both locked-antiphase and sign-magnitude PWM operation.
    • The new MD10C can be powered from a single power source and external Vin is not required.
     Dimension: 75mm x 43mm

    * For more information about Revision 2.0 please refer to the User's Manual.

    Tutorials:
    Coming Soon
    Rp.0
  • Cytron SmartDriveDuo-30
    SmartDriveDuo-30 is one of the latest smart series motor drivers designed to drive medium power brushed DC motor with current capacity up to 80A peak (few seconds) and 30A continuously, each channel. This driver is designed specially for controlling differential drive mobile robot using RC controller. Nevertheless, MDDS30 also can be controlled using analog joystick or microcontroller (PWM, Serial). MOSFETs are switched at 18 KHz to ensure quiet operation and no annoying whining sound.

    Features:
    • Bi-directional control for dual brushed DC motor.
    • Support motor voltage from 7V to 35VDC.
    • Maximum current up to 80A peak (1 second), 30A continuously, each channel.
    • On board MOSFETs are switched at 18 KHz for quiet operation.
    • Battery low voltage indicator.
    • Battery over voltage indicator.
    • Thermal protection.
    • Current limit protection.
    • Multiple input modes: RC, Analog/PWM, Serial Simplified and Serial Packetized.
    • GROVE compatible connectors for control input.
    • RC (Radio Control) friendly connectors.
    • On board push buttons for fast test and manual operation.
    • On board LED indicators for Error, RUN, Over current, motor output, for each channel.
    • NO POLARITY PROTECTION FOR V MOTOR.
    • Dimension: 81.28mm(W) x 101.60mm (L) x 42mm (H)

    Documents:

    User's Manual
    Coming Soon
    Rp.0
Per Page      1 - 3 of 3
Powered By AbanteCart
TOKOMINIKOMPUTER.COM © 2017
Back to top