Sort By:  
  • Cubieboard 5 (Plus) (AllWinner SOC H8, ARM® Cortex™-A7 Octa-Core)
    Product Description:
    Cubieboard5 is the 5rd generation product in Cubieboard series from Cubietech Limited. CubieBoard is open source hardware which is easy to use open source hardware/development board that suit for Students, Developer, Geek, Maker…The design intention is not only easy to develop, but also easy to use.
    It's a new PCB model adopted with Allwinner H8 main chip (octa cores). Also, it is enhanced with some features, such as 2GB DDR3 memory, DP display port, 100M/1000M RJ45, WIFI+BT (2.4G/5GHz)on-board, support Li-Po battery and RTC battery, SPDIF HD audio interface.
    It's not only for development, but also can be used in various areas like other Mini Pc products. Thanks to its rich interfaces, low costs, and good open source support ambient, more and more developers can benefit based on it and would like to do lots of promotion work for it.
    It's famous open source hardware, Cubietech offial team will continully maintain Android, Debian, Debian Server operating systems. Many other open source distribution would support it as well.
    Linux kenel mainline stream supports it as standard device. We are pleased to participate the community and promote them growing continuously...

    · AllWinner SOC H8, ARM® Cortex™-A7 Octa-Core,PowerVR SGX544MP1 Complies with OpenGL ES 2.0/1.1
    · 1GB/2GB DDR3@480MHz (960MTPS), 2GB Default
    · HDMI&DP 1080P@60Hz display output
    · 100M/1000M Ethernet RJ45
    · Wifi + BT 4.0 wireless connection with antenna on-board
    · SATA 2.0 interface support 2.5' HDD,(for 3.5' HDD, need another 12V power input)
    · Storage solution:NAND Flash +MicroSD card slot / TSD + MicroSD card slot / 2*MicroSD card slot
    · 2 x USB HOST, 1 x OTG, 1 x Toslink (SPDIF Optical), 1 x IR, 4 x LEDs, 1 Headphone, 3 x Keys
    · Power:DC5V @ 2.5A with HDD, support Li-battery & Real Time Clock battery
    · 70 extended pins including I2S, I2C, SPI, CVBS output, Low Resolution ADC x2, UART, PS2, PWMx2, TS/CSI, IRDA, LINEIN&FMIN&MICIN, TVIN analog video signal input x 4 with 2.0mm pitch header pins
    · It's suitable for installing a 2.5 inch HDD/SSD within the cases
         Package Included:
          Cubieboard5 mainboard x1
          SATA 2.0 cable x1
          Mini USB to OTG x1
          Mini USB cable x1
          USB to 1.7 mm DC jack cable x1
          Acrylic casex1
          Ultrathin Heat Sink x1
    Add to Cart
  • Cubieboard 4 (Allwiner CC-A80)
    • Allwinner A80, Octa- Core big-LITTLE A15/A7, 28mm
    • CPU: Arm Cortex A15x4 up to 2.0GHz, A7x4 up to 1.3GHz
    • GPU: PowerVR 64-core G6230
    Memory:  2GB, 64bit, dual channel, 1600MTPS
    Storage: EMMC, up to 64GB, default 8GB, write/red speed 25MB/s
    TF card: Micro SD card slot, SD card specification V2.0
    •   USB 2.0 host x 4
    •   USB 3.0 OTG x 1
    • HDMI Port A, HDMI V1.4
    • VGA, support 1080P resolution output
    Ethernet: 10M/100M/1000M NIC
    • Wi-Fi: 2.4G/5.8G, dual band, 300Mbps
    • Bt: BT4.0+EDR
    IR: IR receiver Philips standard
    RTC: Support 1220 size rechargable button cell 
    • Support 3.5 headphone jack for Audio output
    • Support 3.5 jack for Micphone
    • DCIN 5V/4A power
    • Support USB 3.0 jack power
    • Support 3.7V Li-Po battery
    Keys: Power key, Reset key, Reboot key
    Leds: Power led x 1, User led x 2
    Debug port:
    • UART0 and JTAG. Some I2C interface to peripherals
    Size :146*142*18mm
    Package list :
    •   CCA80 main board x1
    •   Micro 3.0  USB cable x1
    •   Micro 3.0 USB OTG cable x1
    •   Sink fin x1 
    •   5G/ 2.4G antenna x1
    •   Sample acrylic case *1

    Sources :
    Add to Cart
  • Cubietruck (Allwinner Tech A20 SOC)
    • Allwinner Tech A20 SOC
    • SATA supported
    • 54 extended pins
    • Built-in HDMI/ VGA display interface
    • Built-in WIFI+BT module
    • 2GB DDR3 RAM
    • Built-in IR receiver
    • SPDIF audio interface
    • Allwinner Tech SOC A20 ARM® Cortex™-A7 Dual-Core ARM® Mali400 MP2 Complies with OpenGL ES 2.0/1.1
    • 2GB DDR3@480MHz
    • HDMI&VGA 1080P display output on-board
    • 10M/100M/1G Ethernet
    • WIFI + BT wireless connection with antenna on-board
    • SATA 2.0 interface support 2.5’ HDD (for 3.5’ HDD, only need another 12V power input)
    • Storage solution NAND + MicroSD
    • 2 x USB HOST, 1 x OTG, 1 x SPDIF, 1 x IR, 4 x LEDs, 1 x Headphone, 3 x Keys
    • Power DC5V@2.5A with HDD support Li-battery & RTC
    • 54 extended pins including I2S, I2C, SPI, CVBS, LRADC x2,UART, PS2, PWM x2, TS/CSI, IRDA, LINEIN&FMIN&MICIN, TVIN x4 with 2.0 pitch connectors
    • PCB size 11cm *8cm*1.4mm
    • Operating temperature: -10℃ ~ 70℃.
    • Cubietruck / cubieboard 3 main board x1
    • SATA 2.0 cable x1
    • Mini USB to OTG x1
    • Mini USB cable x1
    • USB to 1.7 mm DC jack cable x1
    • Acrylic shell x1
    • Ultrathin Heat Sink x1
    Out Of Stock
Per Page      1 - 3 of 3
Powered By AbanteCart
Back to top