Lain-Lain / Sensor

Sort By:  
  • WEMOS D1 (R2)
    The D1 R2 is a mini wifi board based on the ESP-8266EX.
    • 11 digital input/output pins, all pins have interrupt/pwm/I2C/one-wire supported(except for D0)
    • 1 analog input(3.3V max input)
    • Micro USB connection
    • Power jack, 9-24V power input.
    • Compatible with Arduino
    • Compatible with nodemcu
    sources via
    Add to Cart
  • Wifi Bee ESP8266 (DFROBOT)
    • Wi-Fi Direct (P2P),soft-AP
    • Built-in TCP/IP protocol stack
    • Built-in low-power 32-bit CPU: can work as an application processor
    • Support WPA WPA2/WPA2-PSK encryption
    • Support UART interface
    • Support for TTL serial port to wireless application
    • Working voltage: 3.3V power <240Ma
    • Wireless standard: IEEE802.11b/g/n
    • Frequency: 2.4 GHz
    Sources :
    Note: In order to configure this module, you will need an adapter or Xbee shield that lets you communicate with the module, before you can plug it and use on other modules. Compatible device: Xbee USB adapter (FTDI)
    Add to Cart
  • RFID Module (RC-522 )


    • Current :13-26mA / DC 3.3V
    • Idle Current :10-13mA / DC 3.3V
    • Sleep current: <80uA
    • Peak current: <30mA
    • Operating Frequency: 13.56MHz
    • Supported card types: S50, S70, UltraLight, Pro, Desfire
    • Product Physical Characteristics: Dimensions: 40mm × 60mm
    • Environmental Operating temperature: -20-80 degrees Celsius
    • Environment Storage temperature: -40-85 degrees Celsius
    • Relative Humidity: 5% -95%
    • Data Transfer Rate: Max. 10Mbit / s

    Package Included

    • 1PCS RFID-RC522 module one;
    • 1PCS Standard S50 Blank Card;
    • 1PCS S50 shaped cards one (as shown keychain shape);
    • 1PCS Straight row pin
    • 1PCS Curved row pin
    For Raspberry Pi :
    source and tutorial : here
    Add to Cart
  • MCP3424 18-Bit ADC-4 (DFROBOT)
    Specification :
    • Operating Voltage: 2.7 - 5.5V
    • Standy Current: 300nA (5V)
    • Operating Temperature: -40°C ~ +125°C
    • On-Board Voltage Reference: 2.048V ± 0.05%, Drift 15 PPM /°C
    • On-Board Programmable Gain Amplifier (PGA): x1,x2,x4,x8
    • Differential Input Full Scale Range: -2.048V / PGA ~ 2.048V / PGA (e.g., PGA=4, Range is -0.512 ~ 0.512V)
    • Programmable Resolution: 12, 14, 16, 18bits
    • Programmable Data Rate: 240, 60, 15, 3.75 SPS
    • Gain Error: 0.05% (PGA = 1, 18bits)
    • Offset Error: 15uV (PGA = 1, 18bits)
    • Input Interface: 4 differential channels, PIN header of 2.54mm spacing
    • Output Interface: I2C, PIN header of 2.54mm spacing
    • Size: 27x16mm(1.06x0.63")
    Applications :
    • Temperature Sensing with RTD, Thermistor, and Thermocouple
    • Bridge Sensing for Pressure, Strain, and Force
    • Weigh Scales
    • Battery Fuel Gauges
    Sources :


    Out Of Stock
    • The length 2M
    • Black Color
    • Gold Plate
    • Support Full HD 1080P
    • Ultimate Audio 192/24
    • HDMI Version 1.4A
    Add to Cart
  • 10 DOF IMU Sensor
    10 DOF IMU Sensor (B) is good at motion monitor, as well as detecting/measuring the position, height, and temperature. It would be helpful for making your own copter or balancing robot, provides great man-machine interaction.

    Features :
    MPU9255 :
    • 3-axis gyroscope, 3-axis accelerometer, and 3-axis compass/magnetometer
    • Internal Digital Motion Processing™ (DMP™) engine, offloads complicate fusion calculation, sensor synchronization, gesture recognition, etc.
    • Comparing with MPU6050, the MPU9255 is lower power consumption, and more suitable for wearable devices

      BMP180 :
    • Barometric pressure sensor
    • Embedded temperature sensor for temperature compensation
    • You can get the 10 DOF data through I2C interface

    Specifications :
    • Power : 3.3V~5.5V (internal voltage regulation with low dropout)
    • Accelerometer
    • Resolution : 16 bit
    • Measurement range (configurable) : ±2, ±4, ±8, ±16g
    • Operating current : 450uA
    • Gyroscope
    • Resolution : 16 bit
    • Measurement range (configurable) : ±250, ±500, ±1000, ±2000°/sec
    • Operating current : 3.2mA
    • Compass/Magnetometer
    • Resolution (configurable) : 14 or 16 bit
    • Measurement range : ±4800µT
    • Operating current : 280uA
    • Barometric pressure sensor
    • Resolution (configurable) : 16~19 bit
    • Measurement range : 300~1100hPa (altitude : +9000m~-500m)
    • Accuracy : 0.02hPa(0.17m)
    • Quadcopter
    • Balancing robots
    • Indoor inertial navigation
    • Barometric altimeter
    • Industry measurement
    Sources : 10 DOF IMU Sensor via Waveshare WIki
    Add to Cart
  • Relay Module 2 Channel 5V
    This is a 5V 2-Channel Relay interface board, Be able to control various appliances, and other equipments with large current. It can be controlled directly by Micro-controller (Raspberry Pi, Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic) .

    • 5V 2-Channel Relay interface board, and each one needs 15-20mA Driver Current
    • Equiped with high-current relay, AC250V 10A ; DC30V 10A
    • Standard interface that can be controlled directly by microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)  
    • Indication LED’s for Relay output status
    Add to Cart
    Suitable for Raspberry Pi, Arduino, Cubie and more project
    400 Tie Points
    Dimension: 8 X 5 cm
    Add to Cart
  • IC MCP3008
    This chip will add 8 channels of 10-bit analog input to your microcontroller or microcomputer project. Uses SPI so only 4 pins are required.  this chip as a great accompaniment to the Raspberry Pi computer, because its fun to have analog inputs but the Pi does not have an ADC.

    Data Sheet here

    Features :
    • 10-bit resolution
    • Eight single-ended channels
    • SPI interface
    • ±1 LSB DNL
    • ±1 LSB INL
    • 200 ksps sample rate at 5V
    • -40 to +85°C temperature range

    Add to Cart
  • USB WIFI TRAY (RT5370)

    Suport Raspberry PI and Other SoC
    Plug and Play with Raspbaian Wheezy
    150 Mbps wireless transmission rate                                                                            
    Complies with IEEE 802.11n, IEEE 802.11g, IEEE 802.11b standards
    Stronger signal gain                                                                            
    Maximum close to the wired network                                                                            
    Lower delay on game and moive                                                                            
    Supports 64/128-bit WEP, WPA, WPA2 encryption methods and 802.1 x security authentication standards                                                                            
    A key encryption to supports WPS                                                                             
    High-Speed USB 2.0                                                                            
    Supports soft AP modes                                                                            
    Transmission Distance: Indoor up to 100m, outdoor up to 300m (it is limited in an environment)Operating Systems: WIN 2000/ XP/ VISTA/ WIN 7/ MAC.OS/ LINUX
    Transmission Distance: Indoor up to 100m, outdoor up to 300m (it is limited in an environment)Operating Systems: WIN 2000/ XP/ VISTA/ WIN 7/ MAC.OS/ LINUX

    Chipset Ralink RT5370
    Wireless Standards:IEEE 802.11n, IEEE 802.11g, IEEE 802.11b
    Frequency Band:2.4GHz ISM (Industrial Scientific Medical) Band
    Peak Throughput:150Mbps
    Channel:1--14 channels (Universal Domain Selection)
    Data Security 64/128-bit WEP Encryption WPA, WPA-PSK, WPA2, WPA2-PSK, TKIP/AES
    Support Operating System: Windows 2000, XP, Vista, Win7, Linux, MAC
    Host Interface:High speed USB2.0/1.1 Interface
    Antenna Type:Integrated Antenna
    Operating Temperature: 0oC - 40oC
    Storage Temperature: -20oC - 75oC
    Operating Humidity: 10% - 90% RH,  (non condensing)
    Storage Humidity: 5% - 95% RH, (non condensing)
    Certifications:CE(Europe),FCC(USA),ROHS Compliant,Wi-Fi Compliant                  

    Package :
    1 x USB WiFi Wireless Adapter (tray - tanpa kemasan)
    Out Of Stock
  • Relay module 8 channel 5V
    This is a 5V 8-Channel Relay interface board, Be able to control various appliances, and other equipments with large current. It can be controlled directly by Micro-controller (Raspberry Pi, Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic) .

    • 5V 8-Channel Relay interface board, and each one needs 15-20mA Driver Current
    • Equiped with high-current relay, AC250V 10A ; DC30V 10A
    • Standard interface that can be controlled directly by microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)  
    • Indication LED’s for Relay output status
    • suport optocoupler
    Add to Cart
  • ArduCAM CC3200 WIFI Camera
    ArduCAM WIFI camera board is open source WIFI camera develop board which is based on Texas Instruments CC3200 SimpleLink WIFI IoT solution and Aptina MT9D111 camera module. It offers the high quality live video streaming functions as well as keep the small size and low power consumption.
    I makes connectivity even easier with the next-generation SimpleLink Wi-Fi solutions. The product family features Internet-on-a-chip™, Wi-Fi CERTIFIED™ solutions solving industry challenges for broad embedded applications. With SimpleLink CC3200 solutions you can:
    • Program applications on the industry’s first Internet-on-a-chip solution with user dedicated MCU
    • Power Wi-Fi battery-operated designs for more than a year on two AA batteries
    • Start quickly, no Wi-Fi experience needed

    Both CC3200 solutions are supported by a software development kit (SDK) including software drivers, sample applications, API guide, user documentation and a world-class support E2E™ community. On the integrated Cortex-M4, all sample applications in the SDK are supported with Code Composer Studio™ Integrated Development Environment and no RTOS. A few of the applications support IAR, GCC, Free RTOS, TI-RTOS. And ArduCAM team provides a complete solution on WIFI video transmission.

    Source :

    Add to Cart
  • Bluetooth 4.0 NRF51822 Eval Kit

    NRF51822 Eval Kit is a development/evaluation kit designed for nRF51822, consists of the mother board BLE400 and the wireless module Core51822.

    BLE400 features :
    • Onboard battery holder, multi power supplies are available
    • All the IOs are accessible for easy expansion
    • Integrates CP2102 for debugging
    • LEDs and user keys, compatible with other official boards, easy to use
    What's on the BLE400

    1. Wireless module connector: for easily connecting modules like Core51822
    2. MCU pins expansion connector
    3. I2C interface
    4. SPI interface
    5. 5V/3.3V power input/output: usually used as power output, also common-grounding with other user board
    6. USB connector: USB TO UART via onboard convertor CP2102
    7. Debugging interface
    8. UART interface
    9. Battery holder
    10. User LEDs
    11. User keys
    12. Reset button
    13. CP2102
    14. USB TO UART jumper
    15. LEDs & Keys jumper
    Sources : here
    Add to Cart
  • NodeMCU (V2 Lua WIFI )
    The NodeMcu is an open-source firmware and development kit that helps you to
    Prototype your IOT product within a few Lua script lines. 
    • Open-source
    • Interactive
    • Programmable
    • Low cost
    • Simple
    • Smart
    • WI-FI enabled
    Ard--uino-like hardware IO
    Advanced API for hardware IO, which can dramatically reduce the redundant work for configuring and manipulating hardware.
    Code like ard--uino, but interactively in Lua script.
    Nodejs style network API
    Event-driven API for network applicaitons, which faciliates developers writing code running on a 5mm*5mm sized MCU in Nodejs style.
    Greatly speed up your IOT application developing process.
    Lowest cost WI-FI
    Less than $2 WI-FI MCU ESP8266 integrated and esay to prototyping development kit.
    We provide the best platform for IOT application development at the lowest cost.
    The Development Kit based on ESP8266, integates GPIO, PWM, IIC, 1-Wire and ADC all in one board.
    Power your developement in the fastest way combinating with NodeMCU Firmware!
    • USB-TTL included, plug&play
    • 10 GPIO, every GPIO can be PWM, I2C, 1-wire
    • PCB antenna
    Add to Cart
  • USB TO TTL (Prolific PL2303HXA)
    The PL-2303HX is a low cost and high performance USB-to-Serial Bridge Controller. The PL-2303HX provides a convenient solution for connecting an RS-232 full-duplex asynchronous serial device to any Universal Serial Bus (USB) capable host. The PL-2303HX highly compatible drivers could simulate the traditional COM port on most operating systems allowing the existing applications based on COM port to easily migrate and be made USB ready. The PL-2303HX is exclusively designed for mobile and embedded solutions in mind, providing a small footprint that could easily fit in to any connectors and handheld devices. With very small power consumption in either operating or suspend mode, the PL-2303HX is perfect for bus power operation with plenty of power left for the attached devices. Flexible signal level requirement on the RS-232 serial port side also allows the PL-2303HX to connect directly to 3.3V ~ 1.8V devices. PL-2303HX integrates on-chip clock generator and OTP ROM to save external crystal and EEPROM. Customers can design with effective BOM cost and compact PCB size.

    Sources :
    Add to Cart
  • Kabel HDMI to HDMI (30 CM)
    Kabel HDMI to HDMI dengan panjang kurang lebih 30 cm
    warna hitam, tipe kabel gepeng
    Add to Cart
  • NRF24L01
    • NRF24L01 + onboard 2.4GHz Antenna Wireless Transceiver Module
    • Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability, particularly suitable for industrial control applications
    • 125 Channels.
    • Multi-point communication and frequency hopping to meet the communication needs
    • Built-in hardware CRC error detection,
    • Multipoint communication address control
    • Standard DIP Pitch Interface for embedded applications
    • Low-power 1.9 ~ 3.6V, only 1uA on Power down mode
    • Built-in 2.4GHz antenna
    • Color: Black
    Add to Cart
  • L298N motor driver (Dual H Bridge DC Stepper)
    Double H bridge drive
    Chip: L298N
    Logical voltage: 5V
    Drive voltage: 5V-35V
    Logical current: 0mA-36mA
    Drive current: 2A (MAX single bridge)
    Storage temperature: -20 to +135
    Max power: 25W
    Weight: 30g
    Size: 43 x 43 x 27mm
    Add to Cart
  • GPS Module Ublox ( NEO-6-MV2 )


    • GPS modules NEO-6M, 3V-5V power supply Universal
    • Model: GY-GPS6MV2
    • Destined module with ceramic antenna, signal super
    • Save the configuration parameter data EEPROM Down
    • With data backup battery
    • There are LED signal indicator
    • Antenna size 25 * 25mm
    • Module size 25mm * 35mm
    • Installation aperture 3mm
    • Default Baud Rate: 9600
    • Compatible with various flight control modules that provide GPS computer test software

    Package Content

    • 1 x GY-NEO6MV2 New GPS Module
    Add to Cart
  • Waterproof DS18B20 kit (DFROBOT)
    Specification :
    • Operating voltage: 3.0~ 5.5V
    • ±0.5°C Accuracy from -10°C to +85°C
    • Usable temperature range: -55 to 125°C (-67°F to +257°F)
    • 9 to 12 bit selectable resolution
    • Uses 1-Wire interface- requires only one digital pin for communication
    • Unique 64 bit ID burned into chip
    • Multiple sensors can share one pin
    • Temperature-limit alarm system
    • Query time is less than 750ms
    • 3 wires interface:
      • Type A
        • Red wire - VCC
        • Black wire - GND
        • Yellow wire - DATA
      • Type B 
        • Red wire - VCC
        • Yellow wire - GND
        • Green wire - DATA
    • Stainless steel tube 6mm diameter by 35mm(1.34") long
    • Cable diameter: 4mm(0.16")
    • Length: 90cm(35.43")
    Source : Wiki Doc
    Add to Cart
Per Page      1 - 20 of 23
Powered By AbanteCart
Back to top