Search Criteria


Products meeting the search criteria

Sort By:  
  • Raspberry Pi to Arduino shields connection bridge
    Feature :
    • Suport ArduPi Library
    • Arduino all the I/O interfaces: i2C, SPI, UART, analog, digital, in Raspberry Pi.
    • Suport Raspberry pi B rev 2, A+, B+, 2B
    Sources : via Cookinghack and Sainsmart
    Out Of Stock
  • Arduino Base Shield V2
    For Arduino
    • 5V/3.3V compatible.
    • 4 analog ports.
    • 8 digital ports.
    • 4 I2C ports.
    • 1 UART port.
    • Stackable for greater expandability.
    As an expansion board, Base Shield v2 has many Grove connectors, making it convenient for you to use Grove products together. And It is compatible with a series of Arduino products.

    Power Compatible: Every Grove connector has four wires, one of which is Vcc. However, not every micro-controller main board needs a supply voltage of 5V, some need 3.3V. That's why we add a power switch to Base Shield v2. In this way, you can adjust the voltage of Vcc via this switch, making sure the voltage of Vcc is the same as supply power of the main board.

    So While using Arduino UNO with Base Shield v2, please turn the switch to 5v position; While using Seeeduino Arch with Base Shield v2, please turn the switch to 3.3v. 
    Board Compatible: The number of pinout is the same as that of Arduino UNO R3.
    Added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In future, shields will be compatible with both the board that uses the AVR, which operates with 5V and with the Arduino Due that operates with 3.3V. The second one is a not connected pin, that is reserved for future purposes. ---- According to Arduino UNO.
    Sources :  Seeedstuidio Base Shield V2
    Add to Cart
    • Raspberry Pi 1 Model A+
    • Raspberry Pi 1 Model B+
    • Raspberry Pi 2 Model B
    • Raspberry Pi 3 Model B
    1. Pinheaders for connecting with the RPi
    2. UART interface: easily connects to UART modules such as RS232, RS485, USB TO UART, etc.
    3. 8I/Os interface: easily connects to modules controlled by I/Os, such as 8 Push Buttons, Logic Level Converter, Mix Board, etc.
    4. SPI interface: easily connects to SPI modules such as AT45DBXX Dataflash, L3G4200D Board, etc.
    5. I2C interface: easily connects to I2C modules such as PCF8574 Expansion Board, PCF8563 RTC Board, LSM303DLHC Board, etc.
    6. Character LCD interface: for connecting character LCDs like LCD1602
    7. USB connector: USB TO UART, supported by onboard converter CP2102
    8. Power indicator
    9. User LEDs
    10. User Keys
    11. Potentiometer: for LCD1602 contrast adjustment
    12. RTC battery holder
    13. PCF8563: onboard RTC chip
    14. 32.768K crystal: RTC crystal
    15. CP2102: onboard USB TO UART chip, for debugging
    16. CP2102 jumper
    17. RTC jumper
    18. User LEDs jumper
    19. User Keys jumper

    For jumpers above:

    • short the jumper to connect to I/Os used in example code
    • open the jumper to connect to other custom pins via jumper wires
    Add to Cart
  • Arduino Starter Kit (Original Italy)
    The kit includes:
    1 Arduino Projects Book (170 pages)
    1 Arduino UNO board rev.3
    1 USB cable
    1 Breadboard
    1 Easy-to-assemble wooden base
    1 9v battery snap
    70 Solid core jumper wires
    2 Stranded jumper wires
    6 Photoresistor
    3 Potentiometer 10kilohm
    10 Pushbuttons
    1 Temperatursensor
    1 Tilt sensor
    1 LCD alphanumeric (16x2 characters)
    1 LED (bright white)
    1 LED (RGB)
    8 LEDs (red)
    8 LEDs (green)
    8 LEDs (yellow)
    3 LEDs (blue)
    1 Small DC motor 6/9V
    1 Small servo motor
    1 Piezo capsule
    1 H-bridge motor driver
    2 Optocouplers
    5 Transistor
    2 Mosfet transistors
    5 Capacitors 100nF
    3 Capacitors 100uF
    5 100pF capacitor
    5 Diodes
    3 Trasparent gels (red, green, blue)
    1 Male pins strip (40x1)
    20 Resistors 220 ohm
    5 Resistors 560 ohm
    5 Resistors 1 kilohm
    5 Resistors 4.7 kilohm
    10 Resistors 10 kilohm
    5 Resistors 1 megohm
    5 Resistors 10 megohm
    Add to Cart
  • Arduino Ethernet Shield (W5100)
    Product Details:
    Ethernet Shield W5100
    Size: approx. 6.6cm x 5cm x 1.5cm

    With this Ethernet Shield, your Arduino board can be used to connect to internet
    Can be used as server or client
    Directly plug puzzle board, no soldering required
    This is the latest version of the Ethernet Shield
    This Arduino Ethernet Shield which is based on the Wiznet W5100 Ethernet Chip gives you an easy way to get your Arduino Online

    It is directly supported by Arduino official Ethernet Library
    and micro-SD card slot, which can be used to store files for serving over the network

    Compatible with the Arduino Duemilanove (168 or 328), Uno as well as Mega (1280/2560) and can be accessed using the SD library

    The Wiznet W5100 provides a network (IP) stack capable of both TCP and UDP
    It supports up to four simultaneous socket connections
    Use the Ethernet library to write sketches which connect to the internet using the shield
    Add to Cart
  • Arduino Adaptor
    Seri GM 9020F 09A
    Input : 110V - 220Volt AC
    Output : 9V DC
    Kapasitas Amper : 2A
    Jack : 5mm
    Add to Cart
  • Arduino Mega (2560 R3)


    • ATmega2560 microcontroller
    • Input voltage - 7-12V
    • 54 Digital I/O Pins (14 PWM outputs)
    • 16 Analog Inputs
    • 256k Flash Memory
    • 16Mhz Clock Speed


    Out Of Stock
  • Arduino Uno R3 (Atmega328 (Original))
    • Original Italy
    • ATmega328 microcontroller
    • Input voltage - 7-12V
    • 14 Digital I/O Pins (6 PWM outputs)
    • 6 Analog Inputs
    • 32k Flash Memory
    • 16Mhz Clock Speed


    Package :
    1 x Arduino Uno R3 Original
    1 x USB cable
    1 x Small Document
    Out Of Stock
Per Page      1 - 8 of 8
Powered By AbanteCart
Back to top