Arduino

Sort By:  
  • Arduino Ethernet Shield (W5100)
    Product Details:
    Ethernet Shield W5100
    Size: approx. 6.6cm x 5cm x 1.5cm

    With this Ethernet Shield, your Arduino board can be used to connect to internet
    Can be used as server or client
    Directly plug puzzle board, no soldering required
    This is the latest version of the Ethernet Shield
    This Arduino Ethernet Shield which is based on the Wiznet W5100 Ethernet Chip gives you an easy way to get your Arduino Online

    It is directly supported by Arduino official Ethernet Library
    and micro-SD card slot, which can be used to store files for serving over the network

    Compatible with the Arduino Duemilanove (168 or 328), Uno as well as Mega (1280/2560) and can be accessed using the SD library

    The Wiznet W5100 provides a network (IP) stack capable of both TCP and UDP
    It supports up to four simultaneous socket connections
    Use the Ethernet library to write sketches which connect to the internet using the shield
    Add to Cart
    Rp.125,000
  • RFID Module (RC-522 )

    Description

    • Current :13-26mA / DC 3.3V
    • Idle Current :10-13mA / DC 3.3V
    • Sleep current: <80uA
    • Peak current: <30mA
    • Operating Frequency: 13.56MHz
    • Supported card types: S50, S70, UltraLight, Pro, Desfire
    • Product Physical Characteristics: Dimensions: 40mm × 60mm
    • Environmental Operating temperature: -20-80 degrees Celsius
    • Environment Storage temperature: -40-85 degrees Celsius
    • Relative Humidity: 5% -95%
    • Data Transfer Rate: Max. 10Mbit / s

    Package Included

    • 1PCS RFID-RC522 module one;
    • 1PCS Standard S50 Blank Card;
    • 1PCS S50 shaped cards one (as shown keychain shape);
    • 1PCS Straight row pin
    • 1PCS Curved row pin
    For Raspberry Pi :
    source and tutorial : here
    Add to Cart
    Rp.70,000
  • Relay module 4 channel 5V
    This is a 5V 4-Channel Relay interface board, Be able to control various appliances, and other equipments equipment with large current. It can be controlled directly by Micro-controller (Raspberry Pi, Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).
    • 5V 4-Channel Relay interface board, and each one needs 15-20mA Driver Curren
    • Equiped Equipped with high-current relay, AC250V 10A ; DC30V 10
    • Standard interface that can be controlled directly by microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic active low)
    • Opto-isolated inputs
    • Indication LED’s for Relay output status

     
    Out Of Stock
    Rp.70,000
  • Relay Module 2 Channel 5V
    Description:
    This is a 5V 2-Channel Relay interface board, Be able to control various appliances, and other equipments with large current. It can be controlled directly by Micro-controller (Raspberry Pi, Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic) .

    Features:
    • 5V 2-Channel Relay interface board, and each one needs 15-20mA Driver Current
    • Equiped with high-current relay, AC250V 10A ; DC30V 10A
    • Standard interface that can be controlled directly by microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)  
    • Indication LED’s for Relay output status
    Add to Cart
    Rp.38,000
  • Optical Fingerprint Recognition (Sensor Module)
    Color: Black
    Material: Plastic + component
    Working frequency: 433Mhz/868Mhz/915Mhz
    Sensitivity: -100dBm 
    Working voltage: 1.9~3.6V,
    Operating rate: 50Kbps,
    Supply voltage: DC 3.6~6.0V 
    Character file size:256 bytes
    Template size:512 bytes
    Storage capacity:1000
    Search time: < 1 second
    False Acceptance Rate (FAR) < 0.001% 
    False Rejection Rate (FRR) < 1.0% (security level: 3)
    Voltage 3.6-6.0V DC via USB port
    Working current: < 120mA
    Peak voltage: < 140mA
    Window size: 14 x 18mm
    Upstream: UART: (9600×N)bps (N=1~12, N default 6, equal 57600bps)
    Operating environment Temperature: -20 to 50 centigrades
    Relative humidity: 40%RH to 85%RH (No condensation)
    During the fingerprint verification process, the latest collected fingerprint features would be integrated into the fingerprint database automatically so that the users would obtain better and better fingerprint verification result.
    Can be embedded into a variety of end products, such as: access control, attendance, safe, car door locks.
    Out Of Stock
    Rp.675,000
  • Arduino Starter Kit (Original Italy)
    The kit includes:
    1 Arduino Projects Book (170 pages)
    1 Arduino UNO board rev.3
    1 USB cable
    1 Breadboard
    1 Easy-to-assemble wooden base
    1 9v battery snap
    70 Solid core jumper wires
    2 Stranded jumper wires
    6 Photoresistor
    3 Potentiometer 10kilohm
    10 Pushbuttons
    1 Temperatursensor
    1 Tilt sensor
    1 LCD alphanumeric (16x2 characters)
    1 LED (bright white)
    1 LED (RGB)
    8 LEDs (red)
    8 LEDs (green)
    8 LEDs (yellow)
    3 LEDs (blue)
    1 Small DC motor 6/9V
    1 Small servo motor
    1 Piezo capsule
    1 H-bridge motor driver
    2 Optocouplers
    5 Transistor
    2 Mosfet transistors
    5 Capacitors 100nF
    3 Capacitors 100uF
    5 100pF capacitor
    5 Diodes
    3 Trasparent gels (red, green, blue)
    1 Male pins strip (40x1)
    20 Resistors 220 ohm
    5 Resistors 560 ohm
    5 Resistors 1 kilohm
    5 Resistors 4.7 kilohm
    10 Resistors 10 kilohm
    5 Resistors 1 megohm
    5 Resistors 10 megohm
    Add to Cart
    Rp.2,320,000
  • Relay module 8 channel 5V
    Description:
    This is a 5V 8-Channel Relay interface board, Be able to control various appliances, and other equipments with large current. It can be controlled directly by Micro-controller (Raspberry Pi, Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic) .

    Features:
    • 5V 8-Channel Relay interface board, and each one needs 15-20mA Driver Current
    • Equiped with high-current relay, AC250V 10A ; DC30V 10A
    • Standard interface that can be controlled directly by microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)  
    • Indication LED’s for Relay output status
    • suport optocoupler
    Add to Cart
    Rp.120,000
  • NRF24L01P (PA + LNA wireless module )

    *) for advance user because need GPIO connection
    NRF24L01P + PA + LNA Division I for the ultra-long-distance data transmission specially developedhigh-power and high sensitivity wireless module 2.4G ISM band NRF24L01P + PA + LNA wirelessmodule to work in the license-free, can be point-to-pointapplications, can also be composed of a star network,

    NRF24L01P + PA + LNA wireless module core Norway NORDIC company's latest high-performancewireless
    Digital transmission chip NRF24L01 +, with the Division of Professional Design professional full two-way RF power amplifier high power PA and LNA chip, RF switches, bandpass filters, etc., makeseffective communication distance greatly expand.
    RF part, the Secretary has done a lot of optimization matching debugging, the emission efficiency to achieve the highest harmonic minimum
    Makes NRF24L01P + PA + LNA wireless module of RF interference to the external equipment reachesa minimum, while not susceptible to interference from other devices, greatly Uploader
    High stability of the work.
    NRF24L01P + PA + LNA wireless module integration is extremely high, the size of only 41mm *15.5mm, convenient embedded
    In any tight space products, customers can increase an MCU through the SPI port to controlNRF24L01P + PA + LNA
    Wireless module to complete the design of ultra-long-range wireless data transmission systemcompletely eliminates the need for the RF part of the R & D
    Worry about slash R & D spending and shorten the development cycle

     

    Add to Cart
    Rp.80,000
  • Arduino Base Shield V2
    For Arduino
    Specifications
    • 5V/3.3V compatible.
    • 4 analog ports.
    • 8 digital ports.
    • 4 I2C ports.
    • 1 UART port.
    • Stackable for greater expandability.
    As an expansion board, Base Shield v2 has many Grove connectors, making it convenient for you to use Grove products together. And It is compatible with a series of Arduino products.
     
    Features

    Power Compatible: Every Grove connector has four wires, one of which is Vcc. However, not every micro-controller main board needs a supply voltage of 5V, some need 3.3V. That's why we add a power switch to Base Shield v2. In this way, you can adjust the voltage of Vcc via this switch, making sure the voltage of Vcc is the same as supply power of the main board.

     
    So While using Arduino UNO with Base Shield v2, please turn the switch to 5v position; While using Seeeduino Arch with Base Shield v2, please turn the switch to 3.3v. 
     
    Board Compatible: The number of pinout is the same as that of Arduino UNO R3.
     
    Added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In future, shields will be compatible with both the board that uses the AVR, which operates with 5V and with the Arduino Due that operates with 3.3V. The second one is a not connected pin, that is reserved for future purposes. ---- According to Arduino UNO.
     
    Sources :  Seeedstuidio Base Shield V2
    Add to Cart
    Rp.175,000
  • Arduino Mega (2560 R3)

    Features:

    • ATmega2560 microcontroller
    • Input voltage - 7-12V
    • 54 Digital I/O Pins (14 PWM outputs)
    • 16 Analog Inputs
    • 256k Flash Memory
    • 16Mhz Clock Speed

    Documents:

    Out Of Stock
    Rp.250,000
  • NodeMCU (V2 Lua WIFI )
    The NodeMcu is an open-source firmware and development kit that helps you to
    Prototype your IOT product within a few Lua script lines. 
     
    Features:
    • Open-source
    • Interactive
    • Programmable
    • Low cost
    • Simple
    • Smart
    • WI-FI enabled
    Ard--uino-like hardware IO
    Advanced API for hardware IO, which can dramatically reduce the redundant work for configuring and manipulating hardware.
    Code like ard--uino, but interactively in Lua script.
     
    Nodejs style network API
    Event-driven API for network applicaitons, which faciliates developers writing code running on a 5mm*5mm sized MCU in Nodejs style.
    Greatly speed up your IOT application developing process.
     
    Lowest cost WI-FI
    Less than $2 WI-FI MCU ESP8266 integrated and esay to prototyping development kit.
    We provide the best platform for IOT application development at the lowest cost.
     
     
    Specification:
     
    The Development Kit based on ESP8266, integates GPIO, PWM, IIC, 1-Wire and ADC all in one board.
    Power your developement in the fastest way combinating with NodeMCU Firmware!
    • USB-TTL included, plug&play
    • 10 GPIO, every GPIO can be PWM, I2C, 1-wire
    • PCB antenna
    Add to Cart
    Rp.230,000
  • Bluetooth 4.0 NRF51822 Eval Kit

    NRF51822 Eval Kit is a development/evaluation kit designed for nRF51822, consists of the mother board BLE400 and the wireless module Core51822.

    BLE400 features :
    • Onboard battery holder, multi power supplies are available
    • All the IOs are accessible for easy expansion
    • Integrates CP2102 for debugging
    • LEDs and user keys, compatible with other official boards, easy to use
    What's on the BLE400

    1. Wireless module connector: for easily connecting modules like Core51822
    2. MCU pins expansion connector
    3. I2C interface
    4. SPI interface
    5. 5V/3.3V power input/output: usually used as power output, also common-grounding with other user board
    6. USB connector: USB TO UART via onboard convertor CP2102
    7. Debugging interface
    8. UART interface
    9. Battery holder
    10. User LEDs
    11. User keys
    12. Reset button
    13. CP2102
    14. USB TO UART jumper
    15. LEDs & Keys jumper
    Sources : here
    Add to Cart
    Rp.250,000
  • Webduino

    Specifications:

    • WiFi Module – AI Thinker ESP-12F module with Espressif ESP8266 WiSoC
    • Connectivity – WiFi 802.11 b/g/n
    • 2x 8-pin headers with GPIOs,  ADC (Connected to Photocell), UART, VCC, 3.3V, GND, and Reset.
    • USB – 1x micro USB port for power
    • Misc – Photo resistor, RGB LED, micro switch button for firmware upgrade (connected to GPIO 4)
    • Dimensions – 3 x 2.5 cm
    Add to Cart
    Rp.180,000
  • Arduino Uno R3 (ATmega328)

    Features:

    • ATmega328 microcontroller
    • Input voltage - 7-12V
    • 14 Digital I/O Pins (6 PWM outputs)
    • 6 Analog Inputs
    • 32k Flash Memory
    • 16Mhz Clock Speed

    Documents:

    Package :
    1 x Arduino Uno R3 (clone version with logo)
    1 x USB cable
     
    Add to Cart
    Rp.150,000
  • NRF24L01
    • NRF24L01 + onboard 2.4GHz Antenna Wireless Transceiver Module
    • Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability, particularly suitable for industrial control applications
    • 125 Channels.
    • Multi-point communication and frequency hopping to meet the communication needs
    • Built-in hardware CRC error detection,
    • Multipoint communication address control
    • Standard DIP Pitch Interface for embedded applications
    • Low-power 1.9 ~ 3.6V, only 1uA on Power down mode
    • Built-in 2.4GHz antenna
    • Color: Black
    Add to Cart
    Rp.28,000
  • L298N motor driver (Dual H Bridge DC Stepper)
    Double H bridge drive
    Chip: L298N
    Logical voltage: 5V
    Drive voltage: 5V-35V
    Logical current: 0mA-36mA
    Drive current: 2A (MAX single bridge)
    Storage temperature: -20 to +135
    Max power: 25W
    Weight: 30g
    Size: 43 x 43 x 27mm
    Add to Cart
    Rp.55,000
Per Page      1 - 16 of 16
Powered By AbanteCart
TOKOMINIKOMPUTER.COM © 2017
Back to top